eJarn
Username/ID
Plear enter userid
Password      *Forgot Password?
Please enter password
Large Heat Pumps in Europe: Energy from concrete walls
2017/12/28
Dec. 27, 2017 | The outer-walls of a fabrication plant are used as a source for a heat pump
 
The Laumer Bautechnik, located in Bavaria, Germany, was looking for an innovative and cost-efficient heating solution for its pre-fabricated concrete sections fabrication building.
 
By having the University of Munich and the German Ministry of Environment as partners, they developed a heating solution using pre-fabricated concrete elements as energy collectors in combination with a ground heat storage and a heat pump. In this solution, the outer-walls of the fabrication hall, painted black for increased heat absorption and with cast-in piping for energy transportation, serve as heat collectors, while at the same time forming a weather protection. The structural integrity is provided by the inner walls separated from the outer ones by an insulation layer. According to the planning office Kaufmann in Mulheim/Inn, the collector has a surface of 14 000 m2 and the ground storage a volume of 5 000 m3. The collected heat is transported into a underground heat storage where it is collected for the winter heating period. At the core of the system is a large water-water heat pump from Viessmann, using ground heat storage and alternatively a ground source as the heat source, and providing an industrial size panel heating system with the required heating temperature of 37°C, also covering peak demands.
To view the complete content, please log in.
Username/ID
Plear enter userid
Password      *Forgot Password?
Plear enter password